mount

now browsing by tag

 
 

CanAm X3 Mount for Milwaukee Packout system

CanAm-X3-Mount-for-Milwaukee-Packout-system-01-eeu CanAm X3 Mount for Milwaukee Packout system
CanAm X3 Mount for Milwaukee Packout system
CanAm X3 Mount for Milwaukee Packout system
CanAm X3 Mount for Milwaukee Packout system
CanAm X3 Mount for Milwaukee Packout system

CanAm X3 Mount for Milwaukee Packout system
NEW PRODUCT FROM G3 FAB! These are CNC cut from 1/8 steel and Powder coated with high quality powder. All make in the USA by me here at G3 Fab. These units are designed with a right side off set meaning the left side can accommodate two half pack boxes or the wider double boxes up to 20 wide while also having a single half pack box on the right side of the mount. Unit comes with New Stainless steel rear bolts and Poly bushing for rear to keep mount up off of the rear deck plastic. You will use your factory front bolts.
CanAm X3 Mount for Milwaukee Packout system

(1) Tool Box & Mount for Kubota Model BX1880, BX2380, BX2680 & BX23S USA Made

1-Tool-Box-Mount-for-Kubota-Model-BX1880-BX2380-BX2680-BX23S-USA-Made-01-zq (1) Tool Box & Mount for Kubota Model BX1880, BX2380, BX2680 & BX23S USA Made
(1) Tool Box & Mount for Kubota Model BX1880, BX2380, BX2680 & BX23S USA Made
(1) Tool Box & Mount for Kubota Model BX1880, BX2380, BX2680 & BX23S USA Made
(1) Tool Box & Mount for Kubota Model BX1880, BX2380, BX2680 & BX23S USA Made
(1) Tool Box & Mount for Kubota Model BX1880, BX2380, BX2680 & BX23S USA Made

(1) Tool Box & Mount for Kubota Model BX1880, BX2380, BX2680 & BX23S USA Made
This listing is for a Tool Box Mount, Pre-drilled M2A1. 50 caliber steel ammo box, and hardware, that is compatible with Kubota tractor models BX1880, BX2380, BX2680, and BX23S. The hardware included with the tool box mount is shown in the pictures. The hardware includes bolts, washers, and nuts to attach the mounting plate to the Kubota Tractor and hardware to add the included M2A1. 50 caliber ammunition box to the tool box mount. The tool box mount is machined out of aluminum with an integral step to support the tool box. This means the tool box is supported by more than just the bolts. The tool box mount is powder coated in a high gloss black to give it a finish that goes well with the overall look of Kubota tractors. This tool box mount gives you the ability to add the supplied steel M2A1. 50 caliber ammo box for sturdy weather resistant storage on your tractor. It means that you can now carry tools, chains, etc. With you and make less trips because of your increased storage capacity. This tool box mount can be used on either side of your BX1880, BX2380, BX2680, or BX23S Kubota tractor by using factory drilled holes in roll bar. This gives you the ability to customize your tractor in the way that best suits your needs. Work with the roll bar in the raised. Modifications to roll bar required! If you want TWO(2) boxes and TWO(2) mounts see our other listing. The Tool Box Mount was specifically designed to be used with a M2A1. 50 caliber steel ammunition box. One of the reasons for creating this mounting plate to add a M2A1 ammo box is the durability of ammo boxes vs. M2A1 ammo boxes are also waterproof and readily available. When purchasing with this listing you will receive a M2A1. 50 caliber steel ammo box that has the holes already drilled. This means there will be no drilling necessary by you the customer. The M2A1 ammo box you see in the pictures with the loose hardware is representative of the ammo box you will receive. Screens may influence the appearance of the color. Some of the photos show how this tool box mount was specifically made to work with a M2A1. 50 caliber steel ammo box. The last picture shows that the slow-moving sign still has clearance and can be used with this mounting plate and style of ammo box. There is no need to worry about losing your new tool box space to ensure that your tractor has the slow moving sign on. All six(6) of the mounting holes, for the tractor and ammo box, are already machined on the mounti. Ng plate you will receive. This means that there is no need to measure or guess the size of hardware required. The factory holes in the roll bar of your tractor are the holes you will use to attach the tool box mount to your tractor. This tool box mount and hardware allows you to very simply add more function to your tractor. (1) black mounting plate. 50 caliber ammo box. If you want two(2) mounting plates and two(2) boxes that will face the same direction when mounted look at our set of two listing. ! PLEASE NOTE: THIS TOOL BOX MOUNT W/ AMMO CAN LISTING. NO PO BOXES ACCEPTED. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Other Heavy Equipment Parts & Accessories”. The seller is “red_riders” and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Ireland, Qatar, Burundi, Slovakia, Slovenia, Equatorial Guinea, Thailand, Aruba, Sweden, Iceland, Macedonia, Belgium, Israel, Kuwait, Liechtenstein, Benin, Algeria, Antigua and Barbuda, Italy, Swaziland, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Switzerland, Djibouti, Chile, China, Mali, Botswana, Republic of Croatia, Cambodia, Indonesia, Portugal, Malta, Tajikistan, Vietnam, Cayman Islands, Paraguay, Saint Helena, Cyprus, Seychelles, Rwanda, Bangladesh, Australia, Austria, Sri Lanka, Gabon Republic, Zimbabwe, Bulgaria, Czech Republic, Norway, Côte d’Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Greece, Haiti, Greenland, Yemen, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Angola, Western Samoa, France, Mozambique, Namibia, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Colombia, Spain, Estonia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Albania, Ethiopia, Monaco, Niger, Laos, Ghana, Cape Verde Islands, Moldova, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Bolivia, Maldives, Gibraltar, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, Canada, Turks and Caicos Islands, Chad, Andorra, Romania, Costa Rica, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Malawi, Nicaragua, Finland, Tunisia, Luxembourg, Uganda, Brazil, Turkey, Germany, Egypt, Latvia, Jamaica, South Africa, Brunei Darussalam, Honduras.
  • Model: BX1880, BX2380, BX2680
  • Country/Region of Manufacture: United States
  • Compatible Equipment Make: Kubota
  • Brand: Unbranded

(1) Tool Box & Mount for Kubota Model BX1880, BX2380, BX2680 & BX23S USA Made

Power Tool Organizer 10 Slot Drill Charging Station Cordless Holder Wall Mount

Power-Tool-Organizer-10-Slot-Drill-Charging-Station-Cordless-Holder-Wall-Mount-01-twei Power Tool Organizer 10 Slot Drill Charging Station Cordless Holder Wall Mount
Power Tool Organizer 10 Slot Drill Charging Station Cordless Holder Wall Mount
Power Tool Organizer 10 Slot Drill Charging Station Cordless Holder Wall Mount
Power Tool Organizer 10 Slot Drill Charging Station Cordless Holder Wall Mount
Power Tool Organizer 10 Slot Drill Charging Station Cordless Holder Wall Mount
Power Tool Organizer 10 Slot Drill Charging Station Cordless Holder Wall Mount
Power Tool Organizer 10 Slot Drill Charging Station Cordless Holder Wall Mount
Power Tool Organizer 10 Slot Drill Charging Station Cordless Holder Wall Mount

Power Tool Organizer 10 Slot Drill Charging Station Cordless Holder Wall Mount
Power Tool Organizer 10 Slot Drill Charging Station Cordless Holder Wall Mount. Power tool storage rack with wall mounted design makes it easy to move the tool storage, you can assemble to hanging screw on garage wall and warehouse. You can storage a toolbox or various tools, such as power drills, wrenches, screwdriver, electric circular saw, with an additional spot for larger tools like sanders, and more, all of them have own space for storing. Space is fully utilized and you can easily look for your tools and organize them. Solid Wood Drill Holder? The power tool storage organizer is made of hard wood without knots, moisture proof, anti-erosion, practical, sturdy. The surface of each board is polished, smooth and without pungent odor. The edges and corners of each board are polished and will not scratch your fingers. You can spray printing style on cordless drill storage rack as you like. Large power tool holder space with power cord slot, 5 drill hanging grooves, 1 individual tool storage hanger, 2 layers tool shelf with slot for circular saw. Drill bit rack can storge 10pcs drill bit and 9pcs screwdriver set head. Screwdriver rack slot can storge 9pcs different types of screwdrivers. You can choose the hanging side according to your own habits. Strong Load Bearing Capacity? Solid and durable hardwood, enough screws to fix the cordless drill storage, which has strong load-bearing capacity. Don’t worry about the drill storage rack falling. Large tool storage rack size after assembly: 25.8″x11″x 12.6. Storage on both sides size: please note the hole max diameter: 0.4inch. Min diameter: 0.3inch. Wall mount tool holder come with instructions, components and screws. Each board has pre-drill holes, easy to assembly with installation instruction. Different areas, easy to categorize different tools. (You need a power drill or screwdriver to install cordless tool organizer). Large power tool charging station space, 5 drill hanging grooves, 2 layers garage charging station and 1 individual tool storage hanger with drill bit holder and screwdriver holder. Moisture-proof, anti-erosion, strong and durable power tool holder for garage wall. The surface and edges of the wall mount power tool organizer are polished, smooth and will not scratch your fingers. Screws are included for multi-dimensional connection of cordless drill holder parts. Occupy small space, cordless tool rack can make your drill and other small accessories stored neatly, avoid confusion lost. Cordless tool holder with wiring groove design, convenient power tool rack, the bottom of the slot size suitable for most brands of drill. The power drill organizers and storage is easy to install, it comes with components and parts with holes made in advance, you can follow instruction to install. The hanging cordless tool storage has strong load-bearing capacity, holding heavy tools with practical design, keeping tools organized, hanging this tool charging station to any wall or garage tool bench. Product size after assembly: 25.8″x11″x 12.6/65.5x28x32cm. Purpose: drill tools storage. Item Weight: 14 pounds. Color: As picture show. 1 x Power tool holder cabinet (need install by yourself). All screws accessories. The tool storage rack is using high quality pine wood. Lightly polished to show a classic natural wood finish. Easily customizable to match any space. Multi-function Power Drill Holder. With 19 slot drill bit rack and 9 slot screwdriver rack to storage brill bit and screwdriver, you can DIY install by yourself. 2 Layer storage space with wiring groove and saw groove can storage power charging battery and round saws, reciprocating saws, etc. Multiple Slots Drill Station. Tool battery charging station with 1 individual tool storage hanger and 5 drill hanging slots storage cordless drills and small corded drill, sander, etc. These items are held in stock and are available for same day dispatch. Simply return the item to us. But please keep the tags entire and the. This item is in the category “Home & Garden\Tools & Workshop Equipment\Tool Boxes & Storage\Tool Boxes”. The seller is “accommoder” and is located in this country: US. This item can be shipped to United States.
  • Brand: Unbranded
  • Type: Tool Box
  • Features: With Handle
  • Material: Plywood
  • Number of Drawers: /
  • Number of Items: 1
  • Size: 43.4 x 14.6 x10.6 in
  • Model: /
  • Color: wood
  • Item Width: 14.6 inch
  • Item Length: 43.4 inch
  • Item Height: 10.6 inch

Power Tool Organizer 10 Slot Drill Charging Station Cordless Holder Wall Mount

DEWALT DWST08260 ToughSystem Wall Mount Workshop Racking System New

DEWALT-DWST08260-ToughSystem-Wall-Mount-Workshop-Racking-System-New-01-oppq DEWALT DWST08260 ToughSystem Wall Mount Workshop Racking System New
DEWALT DWST08260 ToughSystem Wall Mount Workshop Racking System New
DEWALT DWST08260 ToughSystem Wall Mount Workshop Racking System New
DEWALT DWST08260 ToughSystem Wall Mount Workshop Racking System New
DEWALT DWST08260 ToughSystem Wall Mount Workshop Racking System New
DEWALT DWST08260 ToughSystem Wall Mount Workshop Racking System New
DEWALT DWST08260 ToughSystem Wall Mount Workshop Racking System New

DEWALT DWST08260 ToughSystem Wall Mount Workshop Racking System New
28.9″L x 10.14″W x 6H. Compatible with all Tough System modules. Customized organization with an array of arrangement options. Robust racking solution can load up to 440 lbs. Brackets support shelf add-on option. Stacking side latches allow attaching additional Organizers or other Tough System modules. 28.9 x 10.14 x 6 inches. 2 6ft metal bars, 2 horizontal beams, 5 pairs of brackets. Any product you return must be in the same condition you received it and in the original packaging. We usually respond within 24 hours on weekdays. This item is in the category “Home & Garden\Tools & Workshop Equipment\Tool Boxes & Storage\Tool Boxes”. The seller is “zhaohongbo6647″ and is located in this country: CN. This item can be shipped to United States.
  • Model: DEWALT DWST08260
  • Material: Blend
  • Number of Items: 1
  • Capacity: 440 lb
  • Type: Utility Racks
  • Features: Lockable
  • MPN: DWST08260
  • Number of Drawers: 1
  • Brand: DEWALT

DEWALT DWST08260 ToughSystem Wall Mount Workshop Racking System New

We Got A Big New Tool Box U0026 Aj Trys To Mount Insane Stretch Tires For The Legacy

We-Got-A-Big-New-Tool-Box-U0026-Aj-Trys-To-Mount-Insane-Stretch-Tires-For-The-Legacy-01-irw

Lund 4460FM 60-Inch Flush Mount Truck Tool Box Brite Aluminum NEW

Lund-4460FM-60-Inch-Flush-Mount-Truck-Tool-Box-Brite-Aluminum-NEW-01-uzqx Lund 4460FM 60-Inch Flush Mount Truck Tool Box Brite Aluminum NEW

Lund 4460FM 60-Inch Flush Mount Truck Tool Box Brite Aluminum NEW
Fitment and Product Information. 60-Inch Flush Mount Truck Tool Box – Brite Aluminum. Brandname: Lund Part Number: 4460FM Description. LUND Fender Well and Fender Well Gun, Tower, Top and Rail Top Mount, Flush Mount Side, Side Mount, Heavy Duty Coolers, Hand Held Tool Boxes, Utility Vehicle and ATV, 5th Wheel, and Under Body Specialty Boxes all extend truck storage capacity with safe and secure storage box solutions. The Fender Well, Tower, Top and Rail Top Mount, Flush Mount, and Side Mount truck boxes are designed with a low-profile to allow a clear line of vision for drivers, while offering the maximum amount of storage space. Each box can be mounted along the inside rail of the truck bed, allowing full truck bed usage for larger cargo. The Flush Mount boxes are also available in cross over and in bed configurations and feature offset lid construction that permits lids to open fully without back wall interference. Covering storage solutions both on and off the truck, Lund also offers Heavy Duty Coolers with double wall insulation to keep items cooler longer, Hand Held Tool Boxes for a strong, secure, carrier for valuable tools and equipment. Whether travelling by truck, ATV or Utility Vehicle, LUND has a storage box solution that is perfectly suited for the job. Our ATV and Utility storage boxes are made of the same heavy duty diamond tread aluminum as our larger boxes with hand welded seams for strength and leak proof protection to perfectly fit front and back storage racks securely. Under Body storage boxes occupy unused space under the truck bed, or can be used in the truck bed for secure, dry, storage for tools and other valuables. Box Opening Type: FRONT. Box Style: FLUSH MOUNT. Type Of Lid: Hinged Fixed. WARNING : This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer. The item “Lund 4460FM 60-Inch Flush Mount Truck Tool Box Brite Aluminum NEW” is in sale since Monday, March 9, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Truck Bed Accessories”. The seller is “wundercarparts” and is located in United States. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Interchange Part Number: LND_4460FM
  • Manufacturer Part Number: 4460FM
  • Brand: Lund
  • Warranty: Unspecified Length
  • UPC: 843312003785

Lund 4460FM 60-Inch Flush Mount Truck Tool Box Brite Aluminum NEW

Lund 76461 60 Flush Mount Truck Tool Box Black Steel NEW

Lund-76461-60-Flush-Mount-Truck-Tool-Box-Black-Steel-NEW-01-toju Lund 76461 60 Flush Mount Truck Tool Box Black Steel NEW

Lund 76461 60 Flush Mount Truck Tool Box Black Steel NEW
Fitment and Product Information. 60-Inch Flush Mount Truck Tool Box, Black Steel. Flush Mount, Side Mount, Fender Well, Trailer Tongue, and Cargo Carrier Specialty Boxes extend the storage capacity of your truck without interfering with truck bed usage. These boxes are available for most mid and full size passenger trucks and feature 16 gauge steel with hand welded seams for unparalleled strength and leak proof performance. The Fender Well, Top Mount, Flush Mount, and Side Mount truck boxes are designed with a low-profile to allow a clear line of vision for drivers, while offering the maximum amount of under box storage space. These boxes can be mounted along the inside rail of the truck bed, allowing full use of the truck bed for larger cargo. The Flush Mount boxes are also available as a cross over and in bed truck box configurations and feature an offset lid construction that permits the lid to open fully without back wall interference. Towable specialty boxes include LUND’s Trailer Tongue boxes, designed to utilize the unused frame space between the trailer hitch and trailer front wall, and Hitch Cargo Carriers that provide an additional platform to tow extra cargo. Both are constructed of heavy duty steel protected with a thick powder coat paint to provide a durable weather and abrasion resistant finish. Hitch Cargo Carriers are available in 36, 48, and 54 sizes, these carriers are perfect when used with one of LUND’s storage chests. DIM A: 61.000. DIM B: 20.500. Box Opening Type: FRONT. DIM E: 4.000. Box Style: FLUSH MOUNT. DIM C: 19.000. DIM D: 16.000. Type Of Lid: Hinged Fixed. WARNING : This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer. The item “Lund 76461 60 Flush Mount Truck Tool Box Black Steel NEW” is in sale since Monday, July 13, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Truck Bed Accessories”. The seller is “wundercarparts” and is located in United States. This item can be shipped to United States.
  • Manufacturer Part Number: 76461
  • Interchange Part Number: LND_76461
  • Warranty: Unspecified length
  • UPC: 843312008292
  • Brand: Lund

Lund 76461 60 Flush Mount Truck Tool Box Black Steel NEW

Truck Storage Tool Box 48 Side Mount Bed Aluminum Auto Lift Case Bin Toolsbox

Truck-Storage-Tool-Box-48-Side-Mount-Bed-Aluminum-Auto-Lift-Case-Bin-Toolsbox-01-qug Truck Storage Tool Box 48 Side Mount Bed Aluminum Auto Lift Case Bin Toolsbox
Truck Storage Tool Box 48 Side Mount Bed Aluminum Auto Lift Case Bin Toolsbox
Truck Storage Tool Box 48 Side Mount Bed Aluminum Auto Lift Case Bin Toolsbox
Truck Storage Tool Box 48 Side Mount Bed Aluminum Auto Lift Case Bin Toolsbox
Truck Storage Tool Box 48 Side Mount Bed Aluminum Auto Lift Case Bin Toolsbox
Truck Storage Tool Box 48 Side Mount Bed Aluminum Auto Lift Case Bin Toolsbox

Truck Storage Tool Box 48 Side Mount Bed Aluminum Auto Lift Case Bin Toolsbox
2019-01-29 17:47:26. 2019-01-28 21:43:57. 2019-01-28 01:52:39. 2019-01-27 20:12:27. 2019-01-26 18:07:07. 2019-01-25 03:50:10. Truck Storage Tool Box 48 Side Mount Bed Aluminum Auto Lift Case Bin Toolsbox. The Side Mount Box features a small parts partition running the length of the box for extra storage. The Side Mount Box sits on the truck side rails, leaving plenty of room for additional storage space in the truck bed. The locking paddle handle latch is easy to open while providing extra security. The inside of the latch features a patented “up and over” rod allowing one handed opening of the box from either side. Auto-lift self-rising shocks allow easy single handed entry into the truck tool box. The lid and tub are made from rust-resistant diamond tread plate aluminium. 48.00 x 11.50 x 11.00 Inches. Store all of your vehicle repair accessories in this Side Mount Truck Tool Box. Not only does this accessory it also keeps items handy that will help with common repair jobs. This truck box is made of solid aluminum material and has a brite silver color. Please send us a message. BEFORE leaving feedback, filing a return request or a case, and give us a chance to resolve the issue to your satisfaction. Issues can be effectively addressed through simple communication. All inquiries are answered within 24 hours. Thanks for your business. In the unlikely event that there is a problem with your order, you DO NOT need to file a return request. The item “Truck Storage Tool Box 48 Side Mount Bed Aluminum Auto Lift Case Bin Toolsbox” is in sale since Friday, August 3, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Truck Bed Accessories”. The seller is “dal-sales” and is located in Richmond, Texas. This item can be shipped to United States.
  • Modified Item: No
  • Custom Bundle: No
  • Material: Aluminum
  • MPN: 63012334
  • Model: 63012334
  • UPC: 720467123349
  • EAN: 0720467123349
  • Assembled Product Weight: 25.24 lb
  • Features: Locking Paddle Handle Latch
  • Color: Silver, Brite Silver
  • Brand: BETTER BUILT
  • Non-Domestic Product: No

Truck Storage Tool Box 48 Side Mount Bed Aluminum Auto Lift Case Bin Toolsbox

Large Wall Mount Hanging Tool Box Garage Storage Cupboard Metal Chest Cabinet

Large-Wall-Mount-Hanging-Tool-Box-Garage-Storage-Cupboard-Metal-Chest-Cabinet-01-rs Large Wall Mount Hanging Tool Box Garage Storage Cupboard Metal Chest Cabinet
Large Wall Mount Hanging Tool Box Garage Storage Cupboard Metal Chest Cabinet

Large Wall Mount Hanging Tool Box Garage Storage Cupboard Metal Chest Cabinet
LARGE WALL MOUNT HANGING TOOL BOX GARAGE STORAGE CUPBOARD METAL CHEST CABINET. Wall mounted tool cupboard/chest with locks. This tool cabinet/ cupboard is ideal for securely storing your tool. With its 1300 mm length and good height its a space saving device with individual locks on each door. Made from high quality 19gauge steel with a classic power baked enamel finish. The shelves are fully adjustable in height and a total of 6 shelves with each unit. Brand New, boxed and includes VAT in the final price. Large wall mounted design 130cms long. 2 shelves in each cupboard, 6 shelves in total. Each shelve is adjustable in height. Cylinder key locks on each door. 19 gauge strong steel construction. All compartments each have their own 2 keys. Organise your tools like sockets wrenches spanner. Power baked enamel finish. Whole cabinet is one complete unit. VAT receipt included in the price. Manufactured by Dirty-Pro Tools UK. 2 cupboard model – has 2 lockable doors and 6 shelves weight 15.6kgs. 3 cupboard model – has 3 lockable doors and 6 shelves weight 17kgs. 1300mm width x 450mm height x 95mm depth. The item “Large Wall Mount Hanging Tool Box Garage Storage Cupboard Metal Chest Cabinet” is in sale since Tuesday, September 27, 2016. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Tool Boxes & Storage\Tool Boxes”. The seller is “uk-trade-direct” and is located in Derby. This item can be shipped to all countries in Europe, Antigua and barbuda, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, South Korea, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Dominica, Ecuador, Egypt, Guadeloupe, Grenada, French guiana, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Sri lanka, Macao, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Chile, Bahamas, Colombia, Costa rica, Dominican republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El salvador, Trinidad and tobago, Uruguay, Viet nam.
  • Material: Steel
  • Unit Quantity: 15
  • Type: Tool torage Cupboard
  • MPN: Z1215
  • Unit Type: kg
  • Brand: D Pro Tools UK

Large Wall Mount Hanging Tool Box Garage Storage Cupboard Metal Chest Cabinet

Lund 8172T 72-Inch Top Mount L-Wing Truck Tool Box Brite Aluminum NEW

Lund-8172T-72-Inch-Top-Mount-L-Wing-Truck-Tool-Box-Brite-Aluminum-NEW-01-uuk Lund 8172T 72-Inch Top Mount L-Wing Truck Tool Box Brite Aluminum NEW

Lund 8172T 72-Inch Top Mount L-Wing Truck Tool Box Brite Aluminum NEW
Fitment and Product Information. 72-Inch Top Mount L-Wing Truck Tool Box – Brite Aluminum. Brandname: Lund Part Number: 8172T Description. Designed for rugged use, these Top Mount truck boxes are available in single or double box styles to provide additional storage without losing valuable truck bed space. Each box has hand welded seams and is equipped with weatherproof gaskets to prevent leaks, lock out moisture and protect contents. The front opening doors allow for easy access and content visibility. Box Opening Type: FRONT. Box Style: TOP MOUNT. Type Of Lid: Hinged Fixed. WARNING : This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer. The item “Lund 8172T 72-Inch Top Mount L-Wing Truck Tool Box Brite Aluminum NEW” is in sale since Monday, March 9, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Truck Bed Accessories”. The seller is “wundercarparts” and is located in United States. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Interchange Part Number: LND_8172T
  • Manufacturer Part Number: 8172T
  • UPC: 843312000746
  • Brand: Lund
  • Warranty: Unspecified Length

Lund 8172T 72-Inch Top Mount L-Wing Truck Tool Box Brite Aluminum NEW
© 2024: Tool Box New | GREEN EYE Theme by: D5 Creation | Powered by: WordPress